Marble Run Tiered Hoist – wooden 3D puzzle from Ugears The fun with marble runs continues with Ugears' Marble Run Tiered Hoist, the third in a series of Ugears modular marble runs. This unique entrant in our growing collection of entertaining wooden marble runs features a 3-tiered stair lift that
5mm HSS-COBALT L/S WELDON B/N SLOT DRILL
HSS-Co 2 Flute Weldon Shank Ball Nose Long Series Slot Drills - Metric HSS-Co 2 Flute Weldon Shank Ball Nose Long Series Slot Drills • Centre cutting • Weldon shank • Cutting diameter to e8 • Shank diameter to h6 • Manufactured to DIN 1835B
4mm HSS-COBALT L/S WELDON B/N SLOT DRILL
HSS-Co 2 Flute Weldon Shank Ball Nose Long Series Slot Drills - Metric HSS-Co 2 Flute Weldon Shank Ball Nose Long Series Slot Drills • Centre cutting • Weldon shank • Cutting diameter to e8 • Shank diameter to h6 • Manufactured to DIN 1835B
Inline check valve 1/4 x 40 TPI. Live steam
This Inline Check Valve is threaded 1/4-40 (straight thread) on a 3/8″ long brass body. The valve operates using a 1/8″ stainless steel ball and spring.
No.2 Injector Horizontal 11oz per min 5/32 pipe
No.2 11oz/min. 5/32" pipe These are tested upto 120 PSI, and work from 30psi and lower, unto 120psi and higher made by David English Fitting the injector The steam feed, water and delivery tubes, should be copper to suit. The steam and delivery tubes should be kept as short as possible, and
No.3 Injector Horizontal 3/4 pints per min 3/16 pipe
No.3 3/4 pints/min. 3/16" pipe Fitting the injector The steam feed, water and delivery tubes, shoud be copper to suit. The steam and delivery tubes should be kept as short as possible, and any bends must be large enough radius to ensure that the bore is not restricted. The feed check valve
No.6 Injector Horizontal 4 pints per min 1/4 pipe
No.6 4 pints/min. 1/4" pipe Fitting the injector The steam feed, water and delivery tubes, shoud be copper to suit. The steam and delivery tubes should be kept as short as possible, and any bends must be large enough radius to ensure that the bore is not restricted. The feed check valve
No.4 Injector Horizontal 1 1/4 pints per min 3/16 pipe
No. 4 1 1/4 pints/min. 3/16" pipe Fitting the injector The steam feed, water and delivery tubes, should be copper to suit. The steam and delivery tubes should be kept as short as possible, and any bends must be large enough radius to ensure that the bore is not restricted. The feed check valve