The Graham Industries TVR1ABB is a twin-cylinder, reversing steam engine with 1/2” diameter bore by 5/8” stroke. The crankpins are set 90 degrees apart so the engine is self-starting at any position of the crankshaft. A Hackworth reversing gear is used to provide reversing operation and is easily adapted to radio control. All machining is done and critical assemblies such as the silver-soldered manifolds are pre-assembled. All necessary materials and hardware are supplied with the kit. Most of the hardware is stainless steel and the machined parts are made from bass, aluminium and steel. R166ZZ shielded ball bearings are used instead of the brass bearings that the TVR1A uses. This results in even slower low-end speeds, reduced friction and longer engine life. Only a few hand tools are required to assemble this kit. These include: a small set of screwdrivers, needle nose pliers and a small file. Approximately 6 to 10 hours are required to assemble this engine. If desired, all parts will accept a high-polish. This will take some extra time but will produce an exhibition quality model.
With steam or air operating pressures up to 35 PSI, this is a powerful engine for model marine use. After breaking in, the TVR1ABB makes a good display model, operating reliably at low speeds with under 5 PSI pressure. Included with the kit is a detailed instruction manual with drawings, photographs and complete assembly instructions.
Dimensions: • Base: 3.000” x 1.844” • Crankshaft end-to-end: 4.344” • Crankshaft end diameter: 3/16 (.1875”) • Bottom of base to crankshaft center: .469” • Height: 3.375” • Weight: 323g
Available on back-order
|Dimensions||12 × 10 × 2 in|
Our minimum postage charge for UK orders is £2.60.
We do not specify delivery dates or guarantee next day delivery, but if you contact us, we will can let you know if you order will be sent same day or provide a dispatch date. 90% of our orders are sent same day.
ALL parcels that have been charged less than £8.99 will be sent VIA Royal. All orders charged £8.99 will be sent via UKMAIL or other courier services due to their weight or size
International orders will be sent via Royal Mail, DHL, UPS, DPD or FedEx. We are NOT responsible for any charges the receiver may get charged before delivery, for example Customs and Revenue charges that may be owed on the parcel before delivery.
Any orders with a delivery address which is classed as highlands or islands will be subject to extra charges if sent via courier.
Addresses classed as islands and highlands are the discretion of the carrier, and are entirely out of our control.
If such charges will be requested, you will be emailed before hand, and you can cancel your order anytime before it is dispatched.
If you have any queries about your order, please email us email@example.com
Returns are accepted 14 days after purchase. We will replace damaged or faulty items. Items that have been order by mistake or no longer wanted will only be refunded for the value of the product. Postage will not be refunded. ALL items must be returned within 14 days.
If you require you order urgently, please email me before or after to make us aware of this so we can do everything we can to make sure your order is sent as soon as possible